- ページ 3

ドリル Makita 6302HのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6302H 11 ページ。 Makita 6302h drill: specifications
Makita 6302H にも：取扱説明書 (13 ページ), 部品内訳 (2 ページ)

ページを印刷する

11. Avoid accidental starting. Be sure switch is off before plugging in.

Carrying tools with your finger on the switch or plugging in tools that

have the switch on invites accidents.

12. Remove adjusting keys or switches before turning the tool on. A

wrench or a key that is left attached to a rotating part of the tool may

result in personal injury.

13. Do not overreach. Keep proper footing and balance at all times.

Proper footing and balance enables better control of the tool in

unexpected situations.

14.

Use safety equipment. Always wear eye protection. Dust mask, non-

skid safety shoes, hard hat, or hearing protection must be used for

appropriate conditions.

TOOL USE AND CARE

15. Use clamps or other practical way t o secure and support the work-

piece t o a stable platform. Holding the work by hand or against your

body is unstable and may lead t o

loss

of control.

16. Do not force tool. Use the correct tool for your application. The

correct tool will do the job better and safer a t the rate for which

designed.

17. Do not use tool if switch does not turn it on or off. Any tool that

cannot be controlled with the switch is dangerous and must be

repaired.

18. Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing the tool. Such

preventive safety measures reduce the risk of starting the tool

accidentally.

19. Store idle tools out of reach of children and other untrained persons.

Tools are dangerous in the hands of untrained users.

20. Maintain tools with care. Keep cutting tools sharp and clean. Properly

maintained tools, with sharp cutting edges are less likely to bind and

are easier to control.

21. Check for misalignment or binding of moving parts, breakage of parts,

and any other condition that may affect the tool's operation. If

damaged, have the tool serviced before using. Many accidents are

caused by poorly maintained tools.

22. Use only accessories that are recommended by the manufacturer for

your model. Accessories that may be suitable for one tool, may

become

hazardous when used on another tool.

SERVICE

23. Tool service must be performed only by qualified repair personnel.

Service or maintenance performed by unqualified personnel could

result in a risk of injury.

24. When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of

unauthorized parts or failure t o follow Maintenance Instructions may

create a risk of electric shock or injury.