- ページ 7

ドリル Makita 6302HのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 6302H 11 ページ。 Makita 6302h drill: specifications
Makita 6302H にも：取扱説明書 (13 ページ), 部品内訳 (2 ページ)

ASSEMBLY

Side grip (auxiliary handle)

Always use the side grip to ensure

operating safety. Install the side grip so

that the teeth on the grip fit in between the

protrusions on the tool barrel. Then

tighten the grip by turning clockwise at the

desired position.

It may

be swung 360" so

as to be secured at any position. To

remove the side grip, loosen it by turning

counterclockwise. Then push the grip base

away

from

the tool barrel to disengage it.

Installing or removing drill

bit

CAUTION:

Always be sure that the tool is switched off and unplugged before installing or

removing the bit.

To install the bit, place it in the chuck as far

as it will go. Tghten the chuck by hand.

Place the chuck key in each of the three

holes and tighten clockwise. Be sure to

tighten all three chuck holes evenly.

To remove the bit turn the chuck key

counterclockwise in just one hole, then

loosen the chuck bv hand.