- ページ 3

プリンター Lexmark MX610 SeriesのPDF ファックスマニュアルをオンラインで閲覧またはダウンロードできます。Lexmark MX610 Series 4 ページ。 Information guide
Lexmark MX610 Series にも： テックノート (3 ページ), Eメールマニュアル (4 ページ), コピーマニュアル (3 ページ), Ftp マニュアル (3 ページ), 用品マニュアル (3 ページ), 情報マニュアル (1 ページ)

ページを印刷する
Lexmark MX610 Series ファックスマニュアル
Select from the following content sources:
•
Black/White Laser—The original document was printed using a mono laser printer.
•
Color Laser—The original document was printed using a color laser printer.
•
Inkjet—The original document was printed using an inkjet printer.
•
Magazine—The original document is from a magazine.
•
Newspaper—The original document is from a newspaper.
•
Other—The original document was printed using an alternate or unknown printer.
•
Photo/Film—The original document is a photo from film.
•
Press—The original document was printed using a printing press.
Resolution
This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file size and the time
needed to scan your original document. Decreasing the image resolution reduces the file size.
Select one of the following:
•
Standard—Use this when faxing most documents.
•
Fine 200 dpi—Use this when faxing documents with small prints.
•
Super fine 300 dpi—Use this when faxing documents with fine details.
•
Ultra fine 600 dpi—Use this when faxing documents with pictures or photos.
Darkness
This option lets you adjust how light or dark the faxes are in relation to the original document.
Delayed Send
This option lets you send a fax at a later time or date.
Page Setup
This option lets you change the following settings:
•
Sides (Duplex)—This specifies if the original document is printed on one side or on both sides of the page (duplex). This also
identifies what needs to be scanned for inclusion in the fax.
•
Orientation—This specifies the orientation of the original document, and then changes the Sides (Duplex) and Binding settings
to match the orientation.
•
Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.
Scan Preview
This option lets you view the first page of the image before it is included in the fax. When the first page is scanned, the scanning
is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.
Fax Guide
Page 3 of 4