- ページ 5

バスルーム設備 A&E Axil VIIのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。A&E Axil VII 13 ページ。 Rack cabinet

STEP 3

1- Slide the back board (8) into the grooves of the supports (2, 3, & 5).

2- Insert 1 cam lock on the right side of each of the supports (2&3) into the appropriate hole.

3- Insert shelf holder (F) into the designated holes on the shelf (7) shown in figure below.

4- Attach the shelf (7) into the frame by attaching the right support (6) into the assembly. This could

be done by inserting the cam blots of support (6) to the cam bolt holes on supports (2&3) while

ensuring that the shelf holders (F) are also inserted into their appropriate holes.

5- Rotate cam locks (B) clock wise to secure cam bolts (A) in place.

x 2PCS

STEP 4

1- Attach board (1) to the top side of the assembly by inserting 4 screws (C) into their designated

holes on board 1 and tightening them to the assembly.

2- Repeat the step above for support (4) attaching it to the assembly from the bottom side.

x 8PCS

ASSEMBLY STEPS

- 5 -