- ページ 19

GPS Garmin 010-10971-00 - MapSource City Navigator NTのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Garmin 010-10971-00 - MapSource City Navigator NT 30 ページ。 Software de mapeamento
Garmin 010-10971-00 - MapSource City Navigator NT にも：ユーザーマニュアル (24 ページ), オーナーズマニュアル (2 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (28 ページ), (ポルトガル語）ユーザーマニュアル (30 ページ)

Receiving Data from Your GPS Unit

If your GPS unit has a storage card, verify that the card

is inserted correctly into the unit. Also, connect your

GPS unit or card reader to your computer and set your

unit's Data Transfer mode to Garmin, if applicable

(see your unit owner's manual for instructions).

You can receive waypoints, routes, and tracks from

your GPS unit.

To receive data from a GPS unit or card

reader:

1. If you are using an iQue, synchronize with your

personal computer, if necessary, so that you

can send information to MapSource.

Click Receive From

Transfer > Receive From

of your GPS unit or card reader should appear

automatically in the Device menu. If not, click

Find

Device.

MapSource User's Manual

Device

, or click

Device. The name

sIng

ource

ransferrIng

• If you are using a USB card programmer,

"USB Data Card Programmer" appears in

the Device field.

• If you are using a CF or SD card reader,

select the correct drive letter from

the Device field. For example, select

"Removable Disk (E:)."

• If you are using an iQue, select the correct

user name from the Device field.

3. Under What to Receive, check the boxes next

to each type of data you want to receive.

4. Click Receive. MapSource begins receiving

data from your GPS unit or card reader. The

data appears in the corresponding data tabs on

the left side of the window.

ource

ata