- ページ 12

オーブン AEG 944 188 188のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 944 188 188 36 ページ。
AEG 944 188 188 にも: ユーザーマニュアル (32 ページ)

AEG 944 188 188 ユーザーマニュアル
12
www.aeg.com
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.
3. Turn the knob for the temperature
right or left to set the minutes for
DURATION time and press
confirm. Turn the knob for the
temperature right or left to set the
hours for DURATION time and press
to confirm.
The display shows flashing
4. Turn the knob for the temperature
right or left to set the hours for END
time and press
the knob for the temperature right or
left to set the minutes for END time
and press
Oven turns on automatically later on,
works for the set DURATION time and
stops at the set END time.
At the set END time the signal sounds
for 2 minutes.
in the display. The oven turns off.

7. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
7.1 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
again and again until
.
to confirm. Turn
to confirm.
and time setting flash
5. Press any button or open the oven
door to stop the signal.
6. Turn the knob for the oven functions
to the off position.
6.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
to
oven is turned on and off.
1. Press
and "00" flash in the display.
2. Turn the knob for the temperature
right or left to set the seconds and
than the minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
flash in the display. Press any
button to stop the signal.
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
.
flash in the display.