- ページ 14
オーブン AEG 944171643のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG 944171643 36 ページ。 Built-under double oven
ページを印刷する
14
www.aeg.com
4. Press a sensor field to stop the
signal.
5. Turn off the oven.
7.5 How to set: Time Delay
1. Set a heating function and
temperature.
2. Press
starts to flash.
3. Press
Duration.
4. Press
5. Press
Duration.
6. Press
The display shows flashing
7. Press
and press
minutes and then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at
the set End Time. When the set time
ends, the signal sounds for 2 minutes.
The display shows flashing
time setting . The oven turns off
automatically.
8. Press a sensor field to stop the
signal.
9. Turn off the oven.
When the Time Delay
function is turned on, the
display shows a symbol of
the heating function,
a dot and
which clock function is on in
the Clock / residual heat
display.
7.6 How to set: Set + Go
You can use the Set + Go function only
when the Duration is set.
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
again and again until
or
to setthe minutes for
.
or
to set the hours for
.
.
or
to set the End Time
. First you set the
and the
with
. The dot shows
1. Set a heating function and
temperature.
2. Set the Duration.
3. Press
again and again until the
display shows flashing
4. Press
to set the Set + Go
function.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Press a sensor field (apart from ON /
OFF) to start the Set + Go function.
7.7 How to set: Minute Minder
1. Press
.
The display shows flashing
2. Press
to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Press
or
Minder and
to confirm.
4. Press
or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes and the display
shows flashing 00:00 and
5. Press a sensor field to stop the
signal.
7.8 How to set: Count Up
Timer
1. To reset the Count Up Timer press:
and
at the same time .
2. When the display shows "00:00" the
Count Up Timer starts to count up
again.
8.1 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
.
and
with an
and "00".
to set the Minute
.