- ページ 10
GPS Garmin 500W SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Garmin 500W Series 11 ページ。 Continued airworthiness
Garmin 500W Series にも： パイロット・マニュアル補遺 (24 ページ), 補足フライトマニュアル (17 ページ), パイロット・マニュアル補遺 (50 ページ), クイック・リファレンス (25 ページ), 取扱説明書 (26 ページ), 取扱説明書 (23 ページ)
ページを印刷する
See Figure 2
Hardware
1
Screw
2
Lock Washer
3
Flat Washer
4
#8 Ring Terminal
5
Screw
6
Braid
2.8 Diagrams
Refer to the 500W Series Installation Manual (listed under reference documentation in section 2.1 of this
document) for drawings applicable to this installation. Point to point wiring diagrams are in Appendix H
of the 500W Series Installation Manual. Refer to the GNS 500W Series Post-Installation Checkout Log
retained in the aircraft permanent records for a list of the interfaced equipment. The antenna cables are
routed between the 500W series unit and the antenna with disconnects at each unit. The antenna cable
typically is routed behind interior panels in the fuselage.
2.9 Special Inspection Requirements
None, N/A.
2.10 Application of Protective Treatments
None, N/A.
2.11 Data Relative to Structural Fasteners
None, N/A.
500W Series
Instructions for Continued Airworthiness
Figure 2. Flight Stream 210 Bonding
Table 1. Flight Stream 210 Bonding Hardware
P/N
MS35206 (AN515) #8 Pan Head Screw
MS35338-42 #8 Lock Washer
NAS1149FN832P (AN960C8) #8 Washer
MS25036 #8 Ring Terminal
MS51957-42 #6 Screw
QQB575R36T0250 or larger
190-00357-65 Rev. D
Page 10 of 12