ページを印刷するStep 1
Turn off the oven and wait until it is
cold.
Step 2
Pull the front of the shelf support
away from the side wall.
Step 3
Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4
Install the shelf supports in the oppo‐
site sequence.
11.4 How to use: Aqua Cleaning
This cleaning procedure uses humidity to
remove remaining fat and food particles from
the oven.
Step 1
Pour water into the cavity embossment:
200 ml.
Step 2
Set the function:
Press:
Step 3
Set the temperature to 90 °C.
Step 1
Turn off the oven and wait until it is cold
to clean it.
Remove the shelf supports.
Step 2
Grab the grill corners. Pull it forwards
against the spring pressure and out of
two holders. The grill folds down.
Step 3
Clean the oven ceiling with warm water,
a soft cloth and a mild detergent. Let it
dry.
Step 4
Install the grill in the opposite sequence.
Step 5
Install the shelf supports.
.
.
1
Step 4
Let the oven work for 30 min.
Step 5
Turn off the oven.
Step 6
Wait until the oven is cold. Dry the cavi‐
ty with a soft cloth.
11.5 How to remove: Grill
WARNING!
There is a risk of burns.
2
ENGLISH
27