- ページ 4

GPS Garmin Zumo 200 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin Zumo 200 Series 13 ページ。 Zumo 200 series
Garmin Zumo 200 Series にも：クイック・スタート・マニュアル (13 ページ), 取付説明書 (46 ページ)

ページを印刷する

Mount Your zūmo in an

Automobile

1. Pull back the weather cap from the mini-

USB connector located on the back of

your zūmo.

2. Plug the vehicle power cable into the

mini-USB connector.

3. Snap the cradle onto the suction cup

arm.

Suction cup

Cradle

4. Remove the clear plastic from the suction

cup. Clean and dry your windshield and

the suction cup with a lint-free cloth.

5. Place the suction cup on the windshield.

6. Flip the lever back, toward the

windshield.

7. Fit the bottom of your zūmo into the

cradle.

arm

Lever

8. Tilt the zūmo back until it snaps into

place.

9. Plug the other end of the vehicle power

cable into a power outlet in your vehicle.

Your zūmo should turn on automatically if

it is plugged in and the vehicle is running.

Mount Your zūmo on the

Motorcyle

‹

Incorrectly wiring the power cable with

bare wire leads can result in damage to the

vehicle or the battery and can cause bodily

injury. Garmin strongly recommends having

an experienced installer with the proper

knowledge of electrical systems install the

unit.

Warning