- ページ 7

GPS Garmin Zumo 200 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin Zumo 200 Series 13 ページ。 Zumo 200 series
Garmin Zumo 200 Series にも：クイック・スタート・マニュアル (13 ページ), 取付説明書 (46 ページ)

ページを印刷する

Step 5: Install Your zūmo in the

Mount

1. Fit the bottom of your zūmo into the

cradle.

2. Tilt the zūmo back until it snaps into

place.

Remove Your zūmo from Either

Mount

1. Press the release tab on the top of the

mount to release the zūmo.

2. Lift out the zūmo.

3. Place the weather cap on the cradle

(motorcycle mount only).

Release button

Cradle

Configure the zūmo

To turn on your zūmo, press and hold

Follow the on-screen instructions.

Acquire Satellites

Go outdoors to an open area, out of garages,

and away from tall buildings. Stop your

vehicle, and turn on the zūmo. Acquiring

satellite signals may take a few minutes.

The

bars indicate satellite strength.

When the bars are green, the zūmo has

acquired satellites signals. Now you can

select a destination and navigate to it.

Resetting the zūmo

If the zūmo stops functioning, turn the

zūmo off and on again. If this does not

help, press and hold

zūmo should operate normally. You can also

remove the battery, and then reinstall it.

for 10 seconds. The