- ページ 2

室内装飾品 ALISEO ALS-020844-CPのPDF 製品仕様をオンラインで閲覧またはダウンロードできます。ALISEO ALS-020844-CP 2 ページ。

ページを印刷する

Installation steps

Connect the power cord

Ground wire

zero wire

live wire

① After the mirror lamp is wired as required, then hide the wire and

wiring terminal in the ﬁxed base installed on the wall;

② Lift the mirror lamp steadily, align it with the ﬁxed seat on the

wall and push it hard to make the base of the mirror lamp close to

the wall and keep it horizontal;

③ Take out the M4 screw in step 5 and screw it clockwise into the

ﬁxed base with a 2mm hex wrench; Adjust the mirror light pole to be

horizontal and lock the screws.

Operating instructions of mirror lamp

Switch board

Cleaning instruction

1. Regularly wipe the product surface with soft cotton cloth

dipped with low concentration soapy water every month,

and then gently dry the surface with clean cotton cloth to

ensure bright surface luster;

2. Do not use detergents containing bleach, abrasiveness or

washability. Similar products will damage the chrome plated

surface;

3. Remember! When cleaning the product, be sure to cut oﬀ

the main power supply connected to the product to prevent

electric shock.

This product has passed the inspection of the quality department

of our company, and will be delivered after passing the inspection.

The following is our factory batch number. If any quality defects

are found, please inform this number for our reference. Thank you

very much for your cooperation.

1. This step requires the cooperation of two people;

2. One person picks up the mirror lamp close to the

reserved wire;

3. Another person shall connect the ground wire, live

wire and zero wire in strict accordance with the

connection mode shown in the ﬁgure.

The ground wire, zero wire and live wire of the towel rack must be

connected with the ground wire, zero wire and live wire of the

input power line in strict accordance with the wiring mode shown

in the ﬁgure.

Install mirror light

Fixed seat

②

hex wrench

2mm

1. This mirror lamp has only one color temperature light, white light;

2. After power on, press the switch to the left to light the white color

temperature light;

3. Press the switch to the right and the mirror light goes out;

4. The mirror lamp has four rotating shafts. Customers can rotate and

adjust the angle of the mirror lamp according to their own needs.

Disconnect the power supply

③