- ページ 23

GPS Garmin Zumo 590のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Zumo 590 26 ページ。 Zumo 590
Garmin Zumo 590 にも：クイック・スタート・マニュアル (6 ページ), オーナーズマニュアル (26 ページ), 取付説明書 (36 ページ), 取付説明書 (46 ページ)

ページを印刷する

The device does not charge in my vehicle

• Check the fuse in the vehicle power cable

Fuse in the Vehicle Power

• Verify the vehicle is turned on and is supplying power to the

power outlet.

• Verify the interior temperature of the vehicle is between 32°

and 113°F (between 0° and 45°C).

• Verify that the fuse is not broken in the vehicle power outlet.

My battery does not stay charged for very

long

• Decrease the screen brightness

• Shorten the display timeout

• Decrease the volume

(Adjusting the

• Disable Bluetooth wireless technology

• Put the device in sleep mode when not in use

Exiting Sleep

Mode).

• Keep your device away from extreme temperatures.

• Do not leave your device in direct sunlight.

The battery gauge does not seem accurate

Allow the device to fully discharge.

Fully charge the device without interrupting the charge cycle.

My device does not appear as a removable

drive on my computer

On most Windows computers, the device connects using Media

Transfer Protocol (MTP). In MTP mode, the device appears as

a portable device and not as a removable drive. MTP mode is

supported by Windows 7, Windows Vista ® , and Windows XP

Service Pack 3 with Windows Media Player 10.

My device does not appear as a portable

device on my computer

On Mac computers and some Windows computers, the device

connects using USB mass storage mode. In USB mass storage

mode, the device appears as a removable drive or volume, and

not as a portable device. Windows versions prior to Windows

XP Service Pack 3 use USB mass storage mode.

My device does not appear as either a

portable device or a removable drive or

volume on my computer

Disconnect the USB cable from your computer.

Turn off the device.

Plug the USB cable into a USB port on your computer and

into your device.

TIP: Your device should be connected directly to a USB port

on your computer and not to a USB hub.

The device automatically turns on and goes into MTP mode or

USB mass storage mode. A picture of the device connected to a

computer appears on the device screen.

Troubleshooting

(Changing the

Cable).

(Display

Settings).

(Display

Settings).

Volume).

(Disabling

Bluetooth).

(Entering and