- ページ 2
GPS Garmin Zumo 590のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin Zumo 590 6 ページ。 Zumo 590
Garmin Zumo 590 にも： オーナーズマニュアル (26 ページ), オーナーズマニュアル (26 ページ), 取付説明書 (36 ページ), 取付説明書 (46 ページ)
ページを印刷する
Getting Started
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Installing the Battery
1
Rotate the battery cover D-ring counter-clockwise and
remove the battery cover.
2
Locate the lithium-ion battery in the product box.
3
If necessary, insert a microSD™ card
4
Insert the battery with its cable on top.
5
Insert the battery connector
6
Close the battery cover and secure the battery cover D-ring.
Acquiring GPS Signals
To navigate with your device, you must acquire satellites.
the status bar indicates the satellite signal strength. Acquiring
satellites can take several minutes.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go outdoors to an open area, away from tall
buildings and trees.
2
WARNING
into the device.
into the battery port
Entering and Exiting Sleep Mode
You can use sleep mode to conserve battery power when your
device is not in use. While in sleep mode, your device uses very
little power and can wake instantly for use.
TIP: You can charge your device faster by putting it in sleep
mode while charging the battery.
Press the power key
Turning Off the Device
1
Hold the power key until a prompt appears on the screen.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
sleep mode.
2
Select Off.
Transportation Modes
Routing and navigation are calculated differently based on your
transportation mode. The current transportation mode is
indicated by an icon in the status bar.
Choosing a Transportation Mode
.
Select
.
Using Help
Select Apps > Help to view information about using the
device.
Searching Help Topics
Select Apps > Help >
Support and Updates
Garmin Express™ provides easy access to these services for
Garmin ® devices. Some services may not be available for your
device.
• Product registration
• Product manuals
• Software updates
• Map updates
• Vehicles, voices, and other extras
Setting Up Garmin Express
1
Plug the small end of the USB cable into the port on the
device.
in
2
Plug the larger end of the USB cable into an available USB
port on your computer.
3
Go to www.garmin.com/express.
4
Follow the on-screen instructions.
Adjusting the Screen Brightness
1
Select Settings > Display > Brightness.
2
Use the slider bar to adjust the brightness.
.
Automobile mode
Motorcycle mode
Off-road mode
.