- ページ 25

見る Garmin FENIX A03119-00のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Garmin FENIX A03119-00 38 ページ。

ページを印刷する

Select an option:

• To remove an activity from your list of favorites, select

Remove from Favorites.

• To delete the activity from the apps list, select Remove.

Changing the Order of an Activity in the

Apps List

Hold MENU.

Select Settings > Activities & Apps.

Select an activity.

Select Reorder.

Select UP or DOWN to adjust the position of the activity in

the apps list.

Watch Face Settings

You can customize the appearance of the watch face by

selecting the layout, colors, and additional data. You can also

download custom watch faces from the Connect IQ store.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you must

install a watch face from the Connect IQ store

Features, page

17).

You can customize the watch face information and appearance,

or activate an installed Connect IQ watch face.

From the watch face, hold MENU.

Select Watch Face.

Select UP or DOWN to preview the watch face options.

Select Add New to scroll through additional pre-loaded watch

faces.

Select

> Apply to activate a pre-loaded watch face or an

installed Connect IQ watch face.

If using a pre-loaded watch face, select

Select an option:

• To change the style of the hands for the analog watch

face, select Hands.

• To change the style of the numbers for the analog watch

face, select Background.

• To change the background color, select Bkgd. Color.

• To add or change an accent color for the watch face,

select Accent Color.

• To change the data that appears on the watch face, select

Additional Data.

• To change the style of the seconds for the digital watch

face, select Seconds Style.

• To show or hide status icons on the digital watch face,

select Status Icons.

• To save the changes, select Done.

Sensors Settings

Compass Settings

Hold MENU, and select Settings > Sensors & Accessories >

Compass.

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the Compass Manually, page

Display: Sets the directional heading on the compass to letters,

degrees, or milli-radians.

North Ref.: Sets the north reference of the compass

North Reference, page

21).

Mode: Sets the compass to use electronic-sensor data only

(On), a combination of GPS and electronic-sensor data when

moving (Auto), or GPS data only (Off).

Customizing Your Device

Calibrating the Compass Manually

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Hold MENU.

Select Settings > Sensors & Accessories > Compass >

Calibrate > Start.

Follow the on-screen instructions.

TIP: Move your wrist in a small figure eight motion until a

message appears.

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold MENU.

Select Settings > Sensors & Accessories > Compass >

(Connect IQ

North Ref..

Select an option:

• To set geographic north as the heading reference, select

• To set the magnetic declination for your location

• To set grid north (000º) as the heading reference, select

• To set the magnetic variation value manually, select User,

Altimeter Settings

> Customize.

Hold MENU, and select Settings > Sensors & Accessories >

Altimeter.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Calibrate: Allows you to manually calibrate the altimeter sensor.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation.

Hold MENU.

Select Settings > Sensors & Accessories > Altimeter.

Select an option:

• To calibrate automatically from your GPS starting point,

• To enter the current elevation, select Calibrate.

Barometer Settings

Hold MENU, and select Settings > Sensors & Accessories >

Barometer.

Plot: Sets the time scale for the chart in the barometer widget.

Storm Alert: Sets the rate of barometric pressure change that

triggers a storm alert.

21).

Watch Mode: Sets the sensor used in watch mode. The Auto

option uses both the altimeter and barometer according to

your movement. You can use the Altimeter option when your

(Setting the

activity involves changes in altitude, or the Barometer option

when your activity does not involve changes in altitude.

NOTICE

True.

automatically, select Magnetic.

Grid.

enter the magnetic variance, and select Done.

select Auto Cal. > On.