- ページ 4
カーナビゲーションシステム Garmin Cessna Caravan G1000のPDF パイロット・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin Cessna Caravan G1000 25 ページ。 Integrated flight deck
Garmin Cessna Caravan G1000 にも： パイロット・マニュアル (16 ページ), パイロット・マニュアル (6 ページ), パイロット・マニュアル (32 ページ), パイロット・マニュアル (34 ページ), パイロット・マニュアル (21 ページ), 飛行機フライトマニュアル補足 (33 ページ), パイロット・マニュアル (22 ページ)
ページを印刷する
INTRODUCTION
WINDOWS AND FIELDS
On both the PFD and the MFD, the NAV and COM
Frequency windows are located at the top of the display
on either side of the Navigation Status bar.
• The NAV Frequency window is displayed to the
left of the Navigation Status bar.
• The COM Frequency window is displayed to the
right of the Navigation Status bar.
Each radio frequency sub-window is composed of two
(2) fields, a standby field and an active field.
• In the NAV Frequency window, the active frequency
field is located on the right side, while the standby
frequency field is located on the left side.
• In the COM Frequency window, the active frequency
field is located on the left side, while the standby
frequency field is located on the right side.
Standby NAV
Frequency Field
Tuning Box
Active NAV
Frequency Field
4-2
Selected NAV
Radio
Navigation Status Bar
Figure 4.1.2 Frequency Fields
Garmin G1000 VHF NAV/COM Pilot's Guide for Mooney M20M & M20R
RADIO SELECTION
Radio selection is performed as follows:
• NAV radio selection is performed via the CDI
softkey located on the PFD:
– When NAV1 radio is selected, a single green
arrow labeled either 'VOR1' or 'LOC1' is dis-
played on the HSI.
– When NAV2 radio is selected, a double green
arrow labeled either 'VOR2' or 'LOC2' is dis-
played on the HSI.
• COM radio selection is performed via the COM1
MIC or COM2 MIC keys located on the audio panel:
– COM1 MIC key selects COM1 radio.
– COM2 MIC key selects COM2 radio.
Selected COM
Radio
Active COM
Frequency Field
Standby COM
Frequency Field
Tuning Box
190-00445-00 Rev. A