- ページ 14

カーナビゲーションシステム Garmin GPSMAP 76SのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 76S 19 ページ。 Gpsmap 76 series
Garmin GPSMAP 76S にも：適合宣言 (1 ページ), 適合宣言 (1 ページ), 仕様書 (2 ページ)

ページを印刷する

Calibrating the Electronic Compass

After the GPS receiver is initialized the Electronic Compass needs to be

calibrated. Press the PAGE key until the Compass Page is displayed.

When calibrating the compass the GPSMAP 76S needs to be held level.

During the calibration process you will need to slowly turn the unit through two

full circles. There will be a prompt on the display indicating if you are turning to

fast, just right, or to slowly. If the calibration process fails, you will be prompted

to start again.

Calibrating the Compass:

1. Press the MENU key to display the options.

2. Highlight 'Calibrate Compass' and press ENTER.

3. With 'Start' highlighted, press ENTER to begin the calibration.

4. Slowly rotate the unit through two full circles in the same direction while

holding the unit level.

When the calibration process is ﬁ nished the unit will indicate if the calibration

was successful or failed. If the calibration failed, press ENTER to begin the

calibration process again. If the calibration process was successful, press ENTER

to return to the Compass Page.

Quick Start

Calibrating the Compass