- ページ 12

試験装置 Aliyiqi HF-500のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aliyiqi HF-500 15 ページ。 Hf digital display push-pull force gauge

3. After the test is completed, unload the load, turn off the power, remove the fixture, and clean the objects back

into the tool box for the next use.

10. Introduction to storing data and connecting to a computer

1. Store data

Press \"Save \" to save the data. The saved value is the value displayed on the current screen. \"MEM \" will

appear on the display. The stored data can also be saved after shutdown. When you use the\"\" View\"\" key to

view the saved data, \"MEM \" flashes, the number of saves appears first, and the saved value automatically

appears after 2 seconds. Press \"Clear \" key to exit save and enter test directly. Data can also be input into a

computer for analysis and processing. This machine can store 447 data. When there are more than 447 data,

the subsequent data will not be saved.

2. Data clearing

When viewing the interface, press the\"zero\" key for more than four seconds, all the saved data will be cleared,

and the word\"MEM\" will disappear.

3. Introduction to connecting to a computer

a. Use the\"Data Export Program\" in the CD-ROM to export the data saved in the instrument to the computer.

View, print, test times, average value, MAX value, MIN value and judge whether the test result meets the set

requirements. (For details, please refer to the description in\"Data Export Program\")

b. Use the\"Synchronization Test\" in the CD to realize the curve of force value and time. (For details, please

refer to the description in\"Synchronization Test\")

4. If connecting with PLC, modbus protocol needs to be customized.

11. Safety Precautions

1. Matters needing attention:

a. If you purchase this instrument, you need to charge it for 4 ~ 6 hours before it can be used normally.

b. To purchase this instrument, you must use the RS232 computer cable included in the company's distribution

accessories.

c. If the operation is wrong, it may damage the instrument or cause serious accidents. This manual points out

important matters for preventing accidents and how to use the instrument. Please read this manual carefully

before use, and keep it properly after reading to prepare for reading here.

d. If you are testing the impact load, please select the model whose MAX load is twice the impact load to be

tested.

2. Warning matters:

a. During destructive testing, protective masks and gloves should be worn to prevent the splashed material from

hurting the human body during the testing process.

b. Do not use damaged or severely bent fixtures. For self-made fixtures, please refer to the relevant parameters

in this manual (the company also provides various fixtures, customers can choose according to need; purchase

separately).