- ページ 27

カーナビゲーションシステム Garmin GPSMAP 800 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 800 Series 40 ページ。 Flat-mount kit
Garmin GPSMAP 800 Series にも：クイック・スタート・マニュアル (17 ページ), パイロット・マニュアル補遺 (22 ページ), クイック・スタート・マニュアル (4 ページ), オーナーズマニュアル (46 ページ), 取付説明書 (6 ページ), 取扱説明書 (32 ページ), 取付説明書 (34 ページ), 取付説明書 (6 ページ)

ページを印刷する

Navigating to a Vessel in Distress

designates a distress call in the DSC list and marks the

position of a vessel on the Navigation chart at the time of the

DSC distress call.

Select Nav Info > Other Vessels > DSC List.

Select a position-report call.

Select Navigate To.

Select Go To or Route To.

Man-Overboard Distress Calls Initiated from a VHF

Radio

When the chartplotter is connected to a compatible VHF radio

with NMEA 2000, and you initiate a man-overboard DSC

distress call from the radio, the chartplotter shows the man-

overboard screen and prompts you to navigate to the man-

overboard point. If you have a compatible autopilot system

connected to the network, the chartplotter prompts you to start a

Williamson's turn to the man-overboard point.

If you cancel the man-overboard distress call on the radio, the

chartplotter screen prompting you to activate navigation to the

man-overboard location disappears.

Man-Overboard Distress Calls Initiated from the

Chartplotter

When your chartplotter is connected to a Garmin NMEA 2000

compatible radio and you activate navigation to a man-

overboard location, the radio shows the Distress Call page so

you can quickly initiate a man-overboard distress call.

For information on placing distress calls from your radio, see the

VHF radio owner's manual. For information about marking an

MOB, see

Marking and Starting Navigation to an MOB

Position Tracking

When you connect the chartplotter to a VHF radio using NMEA

0183, you can track vessels that send position reports.

This feature is also available with NMEA 2000, when the vessel

sends the correct PGN data (PGN 129808; DSC Call

Information).

Every position report call received is logged in the DSC list

(DSC

List).

Viewing a Position Report

Select Nav Info > Other Vessels > DSC List.

Select a position-report call.

Select an option:

• To switch to position report details, select .

• To switch to a Navigation chart marking the location,

select .

• To switch to a Navigation chart marking the location,

select Next Page.

• To view the position report details, select Previous Page.

Navigating to a Tracked Vessel

Select Nav Info > Other Vessels > DSC List.

Select a position-report call.

Select Navigate To.

Select Go To or Route To.

Creating a Waypoint at the Position of a Tracked

Vessel

Select Nav Info > Other Vessels > DSC List.

Select a position-report call.

Select New Waypoint.

Editing Information in a Position Report

Select Nav Info > Other Vessels > DSC List.

Digital Selective Calling

Select a position-report call.

Select Edit.

• To enter the name of the vessel, select Name.

• To select a new symbol, select Symbol, if available.

• To enter a comment, select Comment.

• To show a trail line for the vessel if your radio is tracking

the position of the vessel, select Trail.

• To select a color for the trail line, select Trail Line.

Deleting a Position-Report Call

Select Nav Info > Other Vessels > DSC List.

Select a position-report call.

Select Edit > Clear Report.

Viewing Vessel Trails on the Chart

You can view trails for all tracked vessels on some chart views.

By default, a black line indicates the path of the vessel, a black

dot indicates each previously reported position of a tracked

vessel, and a blue flag indicates the last reported position of the

vessel.

From a chart or 3D chart view, select MENU > Other

Vessels > DSC Trails.

Select the number of hours to show tracked vessels on the

chart.

For example, if you select 4 Hours, all trail points that are

less than four hours old appear for all tracked vessels.

Individual Routine Calls

When you connect the chartplotter to a Garmin VHF radio over

Location.

the NMEA 2000 or the NMEA 0183 network, you can use the

chartplotter interface to set up an individual routine call.

When setting up an individual routine call from your chartplotter,

you can select the DSC channel on which you want to

communicate. The radio transmits this request with your call.

Selecting a DSC Channel

NOTE: The selection of a DSC channel is limited to those

channels that are available in all frequency bands. The default

channel is 72. If you select a different channel, the chartplotter

uses that channel for subsequent calls until you call using

another channel.

Select Nav Info > Other Vessels > DSC List.

Select a vessel or a station to call.

Select Call with Radio > Channel.

Select an available channel.

Making an Individual Routine Call

NOTE: When initiating a call from the chartplotter, if the radio

does not have an MMSI number programmed, the radio will not

receive call information.

Select Nav Info > Other Vessels > DSC List.

Select a vessel or a station to call.

Select Call with Radio.

If necessary, select Channel, and select a new channel.

Select Send.

The chartplotter sends information about the call to the radio.

On your Garmin VHF radio, select Call.

Making an Individual Routine Call to an AIS Target

From a chart or 3D chart view, select an AIS target.

Select AIS Vessel > Call with Radio.

If necessary, select Channel, and select a new channel.

Select Send.