- ページ 9

カーナビゲーションシステム Garmin GTN 625のPDF アクティベーション手順をオンラインで閲覧またはダウンロードできます。Garmin GTN 625 46 ページ。 Gps/sbas navigation system as installed in cessna 172r
Garmin GTN 625 にも：ユーザーマニュアル (20 ページ), マニュアルの補足 (31 ページ), 正誤表 (4 ページ), ユーザーマニュアル (22 ページ), フライトマニュアル (49 ページ), パイロット・マニュアル (28 ページ)

Data Radio ID

Smart Keys

Figure 2-1. Data Radio ID and Audio Radio ID Locations

7. For GDL 69A/69AH units, the audio portion is activated independently from the weather. The

activations will not be simultaneous. Once the data channel is activated, bring up the XM Radio

page on the MX20. This can be accomplished by pressing the FN key until XM is displayed. Press

the XM smart key. A non-activated unit will display only channel 0 (Radio ID) and channel 1 (XM

Preview). An activated unit will display the full list of XM channels. Tune to channel 1, while

waiting for audio activation. Wait for the XM display to become populated with the XM channel list

(see Figure 2.2 above for an example of what this looks like).

8. Select an XM channel in order to lock in the radio activation.

Channels 0 and 1are free preview channels and should not be used for this procedure. Press the Chan

smart key and then press either the Up or Down Arrow key to select a new channel. Wait for the

channel to be displayed in the Active Channel box at the top of the XM display. The XM radio

activation is complete when the channel is displayed.

190-00355-04

Rev. J

GDL 69/69A XM Satellite Radio Activation Procedures

Audio Radio ID

Line Select Keys

Page 3