- ページ 2

カーナビゲーションシステム Garmin GTN 750のPDF 正誤表をオンラインで閲覧またはダウンロードできます。Garmin GTN 750 4 ページ。 Gps/sbas navigation system as installed in cessna 172r
Garmin GTN 750 にも：アクティベーション手順 (46 ページ), ユーザーマニュアル (20 ページ), マニュアルの補足 (31 ページ), ユーザーマニュアル (22 ページ), フライトマニュアル (49 ページ)

When The Lat

Key Is Touched,

The Latitude

Hemisphere Value

Is Active For

Touch to Select

Hemisphere Value

NOTE: When editing values, turn the Large knob counter-clockwise to

backspace or move the cursor to the left.

GTN 725/750 Pilot's Guide

The following note was added on pages 4-1, 6-1, and 7-1:

NOTE: The Chart feature provides a digital representation of a paper chart

and provides no vertical or lateral course guidance. Flight Plan and Procedures

are separate from Charts, and do provide vertical and lateral course guidance

for the loaded route or procedure shown on the Flight Plan page. The term

"Chart Unavailable" means that the chart cannot be viewed on the Charts

due to either a chart not being published, or an error in the Chart database,

but does not preclude its availability or inclusion of the procedure in the Flight

Plan or Procedures portion of the system. The absence of a chart for a particular

Departure, Arrival, or Approach does not preclude its availability or inclusion in

190-01007-09_0A.indd 2

The Lat/Lon coordinate values will be highlighted. Touch the Lat or

Lon key to toggle selection of the hemisphere values and highlight the

selected value.

Selection

Lat/Lon Coordinate Selection (GTN 7XX Example Shown)

Touch the desired hemisphere keys to select the desired values. After

selecting the hemisphere value, the cursor will advance to the the first

character of the adjacent numeric value for selection. Even when the

hemisphere values are highlighted, touching a valid numeric key will

always place the cursor at the first numeric value. The Large knob may

also be used for cursor movement and characters are selected with the

Small knob.

As each value is selected, the cursor will advance to the next character.

Touch the necessary key for the desired values.

When finished with the Lat/Lon selections, touch the Enter key.

When finished with all selections, touch the Create key to create the

new waypoint.

Garmin GTN Pilot's Guide Errata 1

Touch To Toggle Lat/Lon

Touch to Select

Numeric Values

190-01007-09 Rev. A

3/1/2011 2:21:13 PM