- ページ 16

ミシン Brother 882-T51のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Brother 882-T51 44 ページ。 Embroidery machine

Needle precautions

Be sure to observe the following precautions concerning the correct choice of needle for your machine.

• Your machine is designed to use household embroidery needles. The factory recommended needle is "HAX

130 EBBR" (Organ). Schmetz needles 130/705 H-E may be used as a substitute. Use of any other needles

may break the needle or thread or damage the needle-threading mechanism or result in injuries.

• Never use bent needles. Bent needles can easily break, possibly resulting in injuries.

Embroidering with a bent needle is extremely dangerous since the needle may break while the machine is

operating.

Place the flat side of the needle on a flat surface and check that the distance between the needle and the

flat surface is even. If the needle is bent or the tip of the needle is broken, replace the needle with a new

one. (Refer to "Changing the needle" on page 30.)

1 Flat side

2 Needle type marking

CAUTION

■ Good needle

3 Flat surface

■ Bad needle

If the distance between the needle

and the flat surface is not even, the

needle is bent. Do not use a bent

needle.