カーナビゲーションシステム Garmin nuvi 310のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin nuvi 310 2 ページ。 Declaration of conformity
Garmin nuvi 310 にも：クイック・リファレンス・マニュアル (2 ページ), 特徴 (6 ページ), クイック・リファレンス・マニュアル (2 ページ), 適合宣言 (1 ページ)

This guide provides short instructions for various nüvi operations.

Fold and keep this guide in the pocket of your nüvi carrying case.

WARNING:

See the owner's manual for product warnings and other

important information.

Turning the nüvi On or Off

Press and hold the

Power

button on the top of the nüvi.

Charging the nüvi

To charge the nüvi, use one of the following methods:

● Connect the nüvi to the suction mount and the

12/24-Volt car adapter.

● Connect the USB cable to the nüvi and your computer.

● Connect the AC adapter to the nüvi and a wall outlet

(included with the nüvi 360).

Acquiring Satellites

Before the nüvi can ﬁnd your current location and navigate a route,

you must do the following:

1. Go outdoors to an open area,

away from tall buildings and trees.

2. Flip up the GPS antenna on

the back of the nüvi, so that it is

parallel to the ground.

3. Turn on the nüvi. Acquiring

satellite signals can take a few

minutes.

The

bars indicate satellite strength. When the bars are

green, the nüvi has acquired satellite signals; now you can select a

destination and navigate to it.

Mounting on the Windshield

Check your state and local trafﬁc laws before mounting. Currently, state laws

in California and Minnesota prohibit drivers from using suction mounts on

their windshields while operating motor vehicles. Other Garmin dashboard or

friction mounting options should be used. See the owner's manual for more

details.

1. Plug the power cable into the back of the mount. Plug the

other end into a 12/24-Volt receptacle in your vehicle.

2. Clean and dry your windshield and the suction cup with a

lint-free cloth. Place the suction cup on the windshield.

3. Flip the lever back, toward the windshield.

4. Flip up the GPS antenna. Fit the bottom of your nüvi into

the cradle.

5. Tilt the nüvi back until it snaps into place.