- ページ 36
ミシン Brother 885-X23のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Brother 885-X23 48 ページ。
Brother 885-X23 にも： 操作マニュアル (48 ページ), 操作マニュアル (48 ページ)
ページを印刷する
SEWING BUTTONHOLES AND BUTTONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
If the left side is too open, turn the buttonhole
fine-adjustment screw with a large
screwdriver in the
If the left side is too tight, turn the buttonhole
fine-adjustment screw with a large
screwdriver in the
• This adjustment ensures both sides of the
buttonhole are the same.
Sewing buttons
Stitch
Stitch
Length
Pattern
Name
[mm
(inch)]
4
Zigzag
F
Stitch
(1/64)
5
Zigzag
F
Stitch
(1/64)
6
Zigzag
F
Stitch
(1/64)
Measure the distance between the
1
buttonholes and set the pattern selection
dial to the Zigzag Stitch (1.5 mm, 3.5 mm
or 5 mm) with the desired width.
Turn off the machine.
2
Change the foot to the button sewing foot
3
"M".
Place the darning plate on the needle
4
plate.
Turn on the machine.
5
35
"–"
direction.
"+"
direction.
Stitch
Width
Foot
Other
[mm
(inch)]
Button
1.5
Sewing
Darning
(1/16)
Foot
Plate
"M"
Button
3.5
Sewing
Darning
(1/8)
Foot
Plate
"M"
Button
5
Sewing
Darning
(3/16)
Foot
Plate
"M"
Put a button between the foot and the
6
fabric and make sure that the needle enters
the holes without hitting the button. If it
hits, see step
.
1
At a slow speed, sew about 10 stitches.
7
CAUTION
●
Make sure the needle does not hit the
button during sewing. The needle may
break and you may be injured.
Pull the upper thread at the end of the
8
stitching to the wrong side of the fabric,
and then tie it with the bobbin thread.
Use scissors to cut the upper thread and
the bobbin thread at the beginning of the
stitching.