- ページ 8

KNOWING YOUR SEWING MACHINE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Main power and sewing

light switch

This switch turns the main power and sewing light on or

off.

1 Turn on (toward the 'I' mark)

2 Turn off (toward the 'O' mark)

When you press the foot controller down lightly, the

machine will run at a low speed. When you press

harder, the machine's speed will increase. When you

take your foot off the foot controller, the machine will

stop.

1 Slower

2 Faster

You should make sure that nothing is placed on the foot

controller when the machine is not in use.

CAUTION

●

Do not allow pieces of cloth and dust to

build up on the foot controller. Doing so

could cause a fire or an electric shock.

Note

(For U.S.A. only)

● Foot Controller: Model KD-1902

This foot controller can be used on the

machine with product code 885-X13.

The product code is mentioned on the

machine rating plate.

7

1

2

1

2

The sewing needle must always be straight and sharp

for smooth sewing.

■ Checking the needle correctly

Put the flat side of the needle on a flat surface.

Check the needle from the top and the sides.

Dispose of any bent needles safely.

1 Parallel space

2 Level surface (bobbin cover, glass, etc.)

CAUTION

●

Always turn off the machine before you

change the needle. Otherwise, injuries

may occur if the foot controller is

accidentally pressed and the machine

starts sewing.

●

Only use sewing machine needles for

home use. Other needles may bend or

break and cause injury.

●

Never sew with a bent needle. A bent

needle will easily break and cause injury.

Turn off the machine.

1

Raise the needle by turning the

2

handwheel toward you

(counterclockwise) so that the mark on

the wheel points up.

Lower the presser foot lever.

3

1 Presser foot lever

1

2

1