- ページ 8

カーナビゲーションシステム Garmin VIEO RV 750 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin VIEO RV 750 Series 38 ページ。

ページを印刷する
Select to open the app drawer. The app drawer contains shortcuts
to all of the apps installed on your device.
Select media controls to turn the stereo on or off, change stations,
change volume, and mute the stereo
page
13).
Opening an App
The home screen contains shortcuts for frequently used apps.
The app drawer contains all the apps installed on your device,
organized into two tabs. The Navigation tab contains Garmin
apps useful for navigation. The Tools tab contains apps useful
for communication, document viewing, and other tasks.
Select an option to start an app:
• Select an app shortcut from the home screen.
• Select
, select a tab, and select an app.
Adding Shortcuts to the Home Screen
1
Select
.
2
Select an app tab to view additional applications.
3
Hold an application, and drag it to a location on the home
screen.
Viewing Notifications
1
Swipe down from the top of the screen.
The list of notifications appears.
2
Select an option:
• To launch the action or app mentioned in the notification,
select the notification.
• To dismiss a notification, swipe the notification to the right.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device.
Location services is enabled
Services, page
26).
Bluetooth
®
technology is enabled.
Connected to a Bluetooth device.
Connected to a Wi‑Fi
network
®
page
25).
Active vehicle profile. Swipe down twice and select to view the
vehicle profile settings
(Vehicle Profiles, page
Battery charge level.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location. The
time required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Verify
appears in the status bar, and enable location
services if it does not
(Enabling or Disabling Location
Services, page
26).
3
If necessary, go to an open area with a clear view of the sky,
away from tall buildings and trees.
Acquiring Satellites appears at the top of the navigation map
until the device determines your location.
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
2
(Playback Controls,
(Enabling or Disabling Location
(Connecting to a Wireless Network,
2).
• Spread two fingers apart to zoom in.
Adjusting the Screen Brightness
You can adjust the brightness using either the notification panel
or the settings menu.
1
Select an option:
• Swipe down twice from the top of the screen to expand
the quick settings in the notification panel.
• Select
>
®
2
Use the slider bar to adjust the brightness.
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Routing and navigation are calculated differently based on your
vehicle profile. The activated vehicle profile is indicated by an
icon in the status bar. The navigation and map settings on your
device can be customized separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids
including restricted or impassable areas in routes based on the
dimensions, weight, and other characteristics you entered for
your vehicle.
Adding a Vehicle Profile
You should add a vehicle profile for each camper to be used
with your device.
1
Select
>
> Vehicle Profile >
2
Select your vehicle type:
• To add a motorhome with a permanently attached
camper, select Motorhome.
• To add a motorhome pulling a trailer, select Motorhome
with Trailer.
• To add a camper pulled behind a passenger vehicle,
select Vehicle with Trailer.
3
If necessary, select your trailer type:
• To add a camper pulled using a standard hitch, select
Travel Trailer.
• To add a camper pulled using a fifth-wheel hitch, select
Fifth Wheel.
NOTE: This trailer type is not available in all areas.
• To add a boat trailer pulled using a standard hitch, select
Boat Trailer.
• To add a trailer pulled using a standard hitch, select
Trailer.
4
Follow the on-screen instructions to enter the vehicle
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information
page
3).
Car Profile
The car profile is a preloaded vehicle profile intended for use in
an automobile without a trailer. While using the car profile, the
device calculates standard automobile routes, and routing for
large vehicles is not available. Some features and settings
specific to large vehicles are not available while using the car
profile.
>
> Display > Brightness Level.
Vehicle Profiles
WARNING
.
(Editing a Vehicle Profile,
Vehicle Profiles