- ページ 25

アビオニクス・ディスプレイ Garmin GDL 69のPDF アクティベーション手順をオンラインで閲覧またはダウンロードできます。Garmin GDL 69 38 ページ。 Xm satellite radio instructions for continued airworthiness
Garmin GDL 69 にも：アクティベーション手順 (46 ページ), パイロット・マニュアル補遺 (50 ページ), パイロット・マニュアル補遺 (50 ページ), アクティベーション手順 (16 ページ), 取扱説明書 (44 ページ), 取扱説明書 (8 ページ), マニュアル (15 ページ)

5 GNS 430W/530W – GDL69/GDL69A Activation

For activation of a GDL 69 you will need your XM Data Radio ID, and for activation of a GDL 69A you

will need your XM Data Radio ID and Audio Radio ID, and your billing information. Your Data and

Audio Radio IDs can be found on the last page of this document and on the 430W/530W XM Information

page (see Section 5.2 below).

1. Make sure that the aircraft's XM antenna has an unobstructed view of the southern sky. It is not

recommended for the aircraft to be in a hangar.

2. Hook up the aircraft to external power if available. The activation process may take 45-60 minutes or

more, depending on the demand on the XM activation system.

3. Power on the avionics and allow the GNS 430W/530W to power up.

4. Call XM Satellite Radio 1.800.985.9200. The XM operator will ask you for your Data Radio ID, and

Audio Radio ID (if GDL 69A).

During the activation process do not change channels or pages during this time.

1. Access the XM Information page. This page can be found by rotating the outer knob until the AUX

menu page displays.

2. Rotate the inner knob until the XM INFORMATION page is displayed.

3. If the GDL69 VER field displays "---" then GDL 69/69A to GNS 430W/530W interface

communications are not yet established. Check GDL 69A power, RS-232 configuration, and/or

wiring.

4. Verify DATA ID contains the eight character identification code.

5. Verify DATA SIGNAL quality is either "Weak" or "Strong". If signal quality is "Antenna" or

"None', check the antenna and wiring.

XM Activation Procedures

190-00355-04

NOTE

Page 19

Rev. H