- ページ 31

アビオニクス・ディスプレイ Garmin GDL 69のPDF アクティベーション手順をオンラインで閲覧またはダウンロードできます。Garmin GDL 69 38 ページ。 Xm satellite radio instructions for continued airworthiness
Garmin GDL 69 にも：アクティベーション手順 (46 ページ), パイロット・マニュアル補遺 (50 ページ), パイロット・マニュアル補遺 (50 ページ), アクティベーション手順 (16 ページ), 取扱説明書 (44 ページ), 取扱説明書 (8 ページ), マニュアル (15 ページ)

7. For GDL 69A units, the audio portion is activated independently from the weather. The activations

will not be simultaneous. Once the data channel is activated, bring up the XM Radio page on the

GMX 200. This can be accomplished by pressing the FN key until XM is displayed. Press the XM

smart key. A non-activated unit will display only channel 0 (Radio ID), channel 1 (XM Preview) and

channel 247 (Emergency Alert). An activated unit will display the full list of XM channels. Tune to

channel 1, while waiting for audio activation. Wait for the XM display to become populated with the

XM channel list (see Figure 6-2 above for an example of what this looks like).

8. Select an XM channel in order to lock in the radio activation.

Channels 0, 1, and 247 are free preview channels and should not be used for this procedure. Press

either the Up or Down Arrow key and then press the SEL key to select a new channel. Wait for the

channel to be displayed in the Active Channel box at the top of the XM display. The XM radio

activation is complete when the channel is displayed.

6.2 Refreshing

If the unit is not activated after one hour a 'refresh' may be needed. To accomplish this go to the website

www.xmradio.com/refresh as explained in Section 2.2. When asked for the Radio ID number on the

website, enter the ID number of the service you are refreshing, either your audio package or your data

(weather) package. If refreshing both, you'll have the opportunity to 'refresh another XM radio'. If you

still are having trouble, call Garmin AT technical support using the telephone numbers listed on page iii.

When the GDL 69/69A is not properly activated, in some cases it may be necessary to perform a full

deactivation and reactivation of the system in order to make it work properly. This procedure is

complicated and should never be attempted without the guidance of Garmin AT technical support

personnel. Please contact Garmin AT technical support using the telephone numbers listed on page iii.

XM Activation Procedures

190-00355-04

Page 25

Rev. H