- ページ 26

アビオニクス・ディスプレイ Garmin GDL 69AのPDF パイロット・マニュアル補遺をオンラインで閲覧またはダウンロードできます。Garmin GDL 69A 50 ページ。 Xm satellite radio instructions for continued airworthiness
Garmin GDL 69A にも：アクティベーション手順 (46 ページ), アクティベーション手順 (38 ページ), パイロット・マニュアル補遺 (50 ページ), アクティベーション手順 (16 ページ), 取扱説明書 (44 ページ), 取扱説明書 (8 ページ), マニュアル (15 ページ)

Part Two: Section 3

XM Weather

Winds Aloft Altitude

The Winds Aloft Altitude selection provides the

pilot with the ability to select any wind altitude from

the ground up to 42,000 feet in 3,000 foot increments.

When no data are shown at a given altitude, the data

for that altitude has not been received. Wait for the

next update. The selected altitude is depicted below

the WINDS label.

To change the XM Weather Winds Aloft altitude:

With the "WINDS" product selected, turn the

large right knob to highlight the altitude

value.

Turn the small right knob to change the

value.

When done, press the small right (CRSR)

knob again to remove the cursor (remove

highlighting from the altitude field).

When a GDL 69 (or GDL 69A) is installed, two

(or three) pages are inserted into the 500W/500W' s

AUX page group. Here we discuss the two pages that

are inserted regardless of whether the XM receiver is a

GDL 69 or GDL 69A:

• XM Information Page. This page contains

information that you will use when activating

your XM satellite radio subscription.

• XM Weather Timestamps Page. This page

shows timestamp data for the most recently

received XM weather data.

The other AUX page, which is installed only if the

XM receiver is a GDL 69A.

The XM Information page in the AUX page group

is the page you will refer to when activating your sub-

scription to the XM Satellite Radio services.

• Audio ID. The Audio ID contains the eight-

character identification code of the XM Audio

radio built into the GDL 69A. Provide this ID

to XM Satellite Radio when activating an XM

audio subscription. (In the case of a GDL 69,

this field shows eight hyphens instead of an

190-00356-30 Rev C