- ページ 26

アビオニクス・ディスプレイ Garmin GDL 69AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Garmin GDL 69A 44 ページ。 Xm satellite radio instructions for continued airworthiness
Garmin GDL 69A にも：アクティベーション手順 (46 ページ), パイロット・マニュアル補遺 (50 ページ), アクティベーション手順 (38 ページ), パイロット・マニュアル補遺 (50 ページ), アクティベーション手順 (16 ページ), 取扱説明書 (8 ページ), マニュアル (15 ページ)

3. If the GDL69 VER field displays "---" then GDL 69 Series to GNS 430W/530W interface

communications are not yet established. Check the GDL 69 Series power, RS-232 configuration,

and/or wiring.

4. Verify DATA ID contains the eight character identification code.

5. Verify DATA SIGNAL quality is either "Weak" or "Strong". If signal quality is "Antenna" or

"None', check the antenna and wiring.

6. If you have a GDL 69A/69AH, Verify Audio ID contains the eight character identification code.

Then verify that AUDIO SIGNAL quality is either "Weak" or "Strong". If signal quality is

"Antenna" or "None', check the antenna and wiring.

7. SERVICE CLASS will initially read "DETECTING ACTIVATION". After the your activation

request is completely processed by the SiriusXM activation system the service class field should

change to the class that corresponds to the service level that you requested. This value will either be

Aviation LT or Aviator.

For a list of weather products available for the service level you requested, see Table 5-1.

8. When the correct Service Class is being displayed, press the MENU key, select the "Lock Data Link

Activation" menu item by highlighting it and then press the ENT key. This locks your activation into

the GDL 69 Series.

For all 400W/500W Series, verify that all weather products have been received. Leave

unit on for 1.5 hours to allow all weather products to be received. Do not change channels

or pages during this time.

Page 20

GDL 69/69A XM Satellite Radio Activation Procedures

Figure 5-2. XM Information Page Menu

NOTE

190-00355-04

Rev. K