- ページ 2
アビオニクス・ディスプレイ Garmin GIA 6300のPDF インストレーション情報をオンラインで閲覧またはダウンロードできます。Garmin GIA 6300 14 ページ。
ページを印刷する
8.1
Unit Level Connections ............................................................................................................... 10
8.1.1
Main A and Main B Redundancy ......................................................................................... 10
8.2
System Level Connection ............................................................................................................ 11
9
GIA6300 Pin Out .................................................................................................................................. 12
10
Electrical Bonding ............................................................................................................................ 12
11
Antenna Considerations .................................................................................................................. 12
11.1
VHF COM Antenna Location ....................................................................................................... 12
12
License Requirements ..................................................................................................................... 13
1 Overview
The GIA 6300 is an integrated avionics unit meeting robust environmental requirements. The major
functions of the GIA6300 are:
•
Communications Hub and Data Concentrator,
•
VHF digital COM (118 - 152 MHz; extended frequency range),
•
VOR/VLOC and GBAS receiver,
•
Glideslope receiver,
•
GPS SBAS receiver,
•
Audio Selection, and
•
Marker Beacon Receiver.
•
Other functions such as AFCS (Flight Director) have significant portions of their
processing executed by the GIA 6300.
The GIA 6300 is designed as though the functions are spread out across a federated system. This
provides independence and redundancy between the functions.
2 Physical Characteristics
The GIA 6300 is 7.4" wide x 5.86" high (with the mounting rack). It has a depth of 14.48" to the end of
the strain relief. And additional 0.5" of clearance is desired behind the cooling accessory to allow for
adequate ventilation, and this clearance should be no less than 0.25" .
The weights for the unit and its accessories are listed below.
Unit (Standalone)
Mounting Rack
Cooling Accessory
190-01561-00
Draft1
11.94 lbs
0.57 lbs
0.65 lbs (approximate TBD)
GIA 6300 Installation Manual
Page 2