- ページ 4

アビオニクス・ディスプレイ Garmin GMA 340のPDF パイロット・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin GMA 340 12 ページ。 Audio panel
Garmin GMA 340 にも：パイロット・マニュアル (12 ページ), 補足取扱説明書 (10 ページ), パイロット・マニュアル (4 ページ), パイロット・マニュアル (8 ページ), インストレーション・マニュアル (43 ページ), パイロット・マニュアル (8 ページ)

On, Off, and Failsafe Operation

The GMA 340 is powered off when the left small knob (5, 7) is rotated fully CCW into the detent.

To turn the unit on rotate the knob clockwise past the click. The left small knobs also functions as the

pilot or copilot's ICS volume control on the appropriate unit. A failsafe circuit connects the pilot's headset

and microphone directly to COM 1 in case the power is interrupted or the unit is turned off.

Lighting

LED Button annunciator and marker beacon lamp intensity are controlled automatically by a built-in

photocell on the front panel. Nomenclature backlighting is controlled by the aircraft dimmer buss.

Transceivers

Audio level is controlled by the selected COM radio volume control.

Selection of either COM 1, COM 2, or COM 3 (13) for both MIC and audio source is accomplished

by pressing either COM 1 MIC, COM 2 MIC, or COM 3 MIC (14). The active com audio is always heard

on the headphones.

Additionally, each audio source can be selected independently by pressing COM 1, COM 2, or COM 3

(13). When selected in this way, they remain active as audio sources regardless of which transceiver has

been selected for microphone use.

When a microphone is keyed, the active transceiver's MIC button LED blinks approximately once per

second to indicate that the radio is transmitting.

Split COM (Not Available on Dual ADF)

Pressing the COM 1/2 button (15) activates the Split COM function. When this mode is active,

COM 1 is dedicated solely to the pilot for MIC/audio while COM 2 is dedicated to the copilot for MIC/

audio. The pilot and copilot can simultaneously transmit in this mode over separate radios. Both pilots

can still listen to COM 3, NAV 1, NAV 2, DME, ADF , and MKR as selected. The Split COM mode is

cancelled by pressing the COM 1/2 button a second time.

When in the Split COM mode the copilot may make PA announcements while the pilot continues

using COM 1 independently. When the PA button is pressed after the Split COM mode is activated, the

copilot's mic is output over the cabin speaker when keyed. A second press of the PA button returns the

copilot to normal Split COM operation.

If the COM radios utilize a "transmit interlock" system, the Split COM

function may require that this feature is enabled. Refer to the radio's

installation manual for guidance. GARMIN makes no expressed or implied

guarantees regarding the suitability of the Split COM feature in a given

installation.