- ページ 15

アビオニクス・ディスプレイ Garmin GNC 420AのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Garmin GNC 420A 23 ページ。 400/500 series gts 8xx interface
Garmin GNC 420A にも： 取扱説明書 (6 ページ), パイロット・マニュアル補遺 (27 ページ), パイロット・マニュアル補遺 (4 ページ), パイロット・マニュアル補遺 (22 ページ)

ページを印刷する
Garmin GNC 420A クイック・リファレンス
Scrolling through the list of frequencies:
1)
Activate the cursor, if not already active, by
pressing the small right knob.
Turn the large right knob to move the cursor
2)
through the list of frequencies. If there are
more frequencies in the list than can be
displayed on the screen, a scroll bar along the
right-hand side of the screen indicates which
part of the list is currently being displayed.
Auto tuning a frequency from the NAVCOM
Page:
1)
Highlight the desired frequency by scrolling
through the list of frequencies, as described in
the preceding procedure.
2)
To place a frequency in the standby field of the
COM Window, highlight the desired frequency
and press the ENT Key. (NAV frequencies are
shown for reference only.)
bottom Row ANNUNCiAtoRs ANd messAGes
See Pilot' s Guide for detailed information.
CDI/RAIM Mode
TERRAIN Annunciator
Approach,
TERRAIN,
TERRAIN (Flashing),
Enroute,
Oceanic,
TER FAIL,
Terminal,
TER INHB,
TER N/A
'0.30' (for
VLOC approaches)
Integrity Failure
INTEG
Position Warning
Blank (for auto-
WARN (RAIM protection
limit failure)
190-00140-21 Rev. F
Page Group Indicator
NAV, WPT, AUX, NRST,
FPL, DRCT, PROC, MSG
Waypoint Alert
NEXT DTK, etc.
Turn Advisory
TURN TO_, etc.
OBS Mode
Message Annunciator
Suspend,
On,
OBS,
Flashing (new message),
Blank (no message)
sequencing)
GNC 420/420A Quick Reference

NEAREST AIRPORTS

Viewing a list of nearest airports:
Press the NRST Key to display the Nearest
Airport Page. 'NRST' will appear in the lower
right corner of the screen.
Scrolling through the list of nearest
airports:
1)
Press the small right knob to activate the
cursor.
Turn the large right knob to scroll through the
2)
list. The scroll bar along the right-hand side of
the page will indicate which part of the list is
currently being viewed.
3)
To remove the flashing cursor, press the small
right knob.
15