Worksheet – Arrival, Departure and Approach Procedure Operation
After reviewing the GNS 430 or GNS 530 Pilot' s Guide, complete the following exercises using the Garmin 400 or 500
series PC simulation device.
Exercise 1
Using the simulation device, initialize the simulation device position at KPNC (Ponca City, OK). Create a flight plan
going direct to KICT (Wichita Mid-Continent, Wichita, KS). When 40nm outside of Wichita, load and activate the ILS 1R
approach into KICT via the JAMEY IAF.
Exercise 2
Using the simulation device, initialize the simulation device position at KMCI (Kansas City International, Kansas City,
MO). Create a flight plan to KSTL the Lakes Four Departure via the Columbia transition (LAKES4.COU). Load and acti-
vate the RNAV (GPS) RWY 12L approach into St. Louis International using Vectors-To-Final.
Exercise 3
Using the simulation device, initialize the simulation device position at KICT (Wichita Mid-Continent, Wichita, KS).
Create a flight plan going direct to KMKC (Wheeler Downtown, Kansas City, MO) using the Jayhawk Four Arrival, Empo-
ria Transition (EMP.JHAWK4). Load and activate the GPS RWY 3 using Vectors-To-Final.
Exercise 4
Using the simulation device, initialize the simulation device position at KICT (Wichita Mid-Continent, Wichita, KS).
Create a flight plan going to KIXD (New Century Air Center, Olathe, KS) via the Emporia (EMP) VORTAC. As you ap-
proach New Century, select the RNAV (GPS) 17 approach via the OGUCO IAF.
F
Note: In these exercises be sure to note the difference in Loading an approach and Activating an
approach. Also, review the missed approach operations with each lesson, noting the pilot actions that
are required to continue on a missed approach procedure.
190-00334-00 Rev. A
HOME STUDY
GNS 530/430 Home Study 5
Garmin GNS 530/430 Sample Training Syllabus and Flight Lessons
7
ページを印刷する