- ページ 12

アビオニクス・ディスプレイ Garmin GPS 500のPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Garmin GPS 500 17 ページ。 500 series
Garmin GPS 500 にも：取扱説明書 (6 ページ), パイロット・マニュアル補遺 (27 ページ), パイロット・マニュアル補遺 (4 ページ), クイック・リファレンス (23 ページ), パイロット・マニュアル補遺 (22 ページ), インストレーション・マニュアル (14 ページ), マニュアル (6 ページ)

ページを印刷する

To Create a New Flight Plan

1. Press FPL and rotate the small right

knob to display the Flight Plan Catalog.

2. Press MENU to display the Flight Plan

Catalog options.

3. Rotate the large right knob to

highlight "Create New Flight Plan?" and

press ENT.

4. A blank flight plan page will appear for the

first empty storage location. Use the

small and large right knobs to enter

the identifier of the departure waypoint

and press ENT.

5. Repeat step #4 above to enter the identifier for each additional flight plan

waypoint.

6. Once all waypoints have been entered, press the small right knob to

return to the Flight Plan Catalog.

To Navigate a Flight Plan

1. Press FPL and rotate the small right

knob to display the Flight Plan Catalog.

2. Press the small right knob to activate

the cursor.

3. Rotate the large right knob to highlight

the desired flight plan and press MENU to display the Flight Plan Catalog

options.

4. Rotate the large right knob to highlight "Activate Flight Plan?" and

press ENT.

Flight Plans

To Stop Navigating a Flight Plan

1. Press FPL. The Active Flight Plan page will

appear.

2. Press MENU to display the Active Flight

Plan options.

3. Rotate the large right knob to highlight

"Delete Flight Plan?" and press ENT.

4. Press ENT again to confirm.

To Edit a Flight Plan

1. Press FPL and rotate the small right knob to display the Flight Plan

Catalog.

2. Press the small right knob to activate the cursor.

3. Rotate the large right knob to highlight the desired flight plan and

press ENT.

4. To add a waypoint to the flight plan: Rotate the large right knob to

select the point where you wish to add the new waypoint. (If an existing

waypoint is highlighted, the new waypoint will be placed directly in front of

this waypoint.) Use the small and large right knobs to enter the

identifier of the new waypoint and press ENT.

5. To delete a waypoint from the flight plan: Rotate the large right knob to

select the waypoint you wish to delete and press CLR to display a "remove

waypoint" confirmation window. With "Yes?" highlighted, press ENT to

remove the waypoint.

6. Once all changes have been made, press the small right knob to return

to the Flight Plan Catalog.