- ページ 3

アビオニクス・ディスプレイ Garmin GPS 500のPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Garmin GPS 500 23 ページ。 500 series
Garmin GPS 500 にも：取扱説明書 (6 ページ), パイロット・マニュアル補遺 (27 ページ), パイロット・マニュアル補遺 (4 ページ), クイック・リファレンス (17 ページ), パイロット・マニュアル補遺 (22 ページ), インストレーション・マニュアル (14 ページ), マニュアル (6 ページ)

ページを印刷する

(7) Small Right Knob – Used to select pages within

one of the page groups. Press this knob momentarily

to display the on-screen cursor. The cursor allows the

pilot to enter data and/or make a selection from a list of

options. When entering data, the small right knob is used

to select the desired letter or number and the large right

knob is used to move to the next character space. The

small right knob is also used to move the target pointer

up (turn clockwise) or down (counterclockwise) when the

map panning function is active.

(8) Large Right knob – Used to select page groups: NAV,

WPT, AUX, or NRST. With the on-screen cursor enabled, the

large right knob allows the pilot to move the cursor about

the page. The large right knob is also used to move the target

pointer right (turn clockwise) or left (counterclockwise)

when the map panning function is active.

190-00181-61 Rev. D

bottom Row KeyS

(9) NRST Key – The NRST Key displays the Nearest

Airports Page. Then, turning the small right knob steps

through the NRST pages.

(10) OBS Key – Used to select manual or automatic

sequencing of waypoints. Pressing the OBS Key selects

OBS mode, which retains the current 'active to' waypoint

as the navigation reference even after passing the waypoint

(i.e., prevents sequencing to the next waypoint). Pressing

the OBS Key again returns the unit to normal operation,

with automatic sequencing of waypoints. When OBS

mode is selected, the pilot may set the desired course

to/from a waypoint using the Select OBS Course pop-up

window, or an external OBS selector on the HSI or CDI.

(11) MSG Key – Used to view system messages and to

alert the pilot to important warnings and requirements.

(12) FPL Key – Allows the pilot to create, edit, activate,

and invert flight plans, as well as access approaches,

departures, and arrivals. A closest point to flight plan

feature is also available from the FPL Key.

(13) VNAV (Vertical Navigation) Key – Allows the

pilot to create a three-dimensional profile which provides

guidance to a final (target) altitude at a specified location

(14) PROC Key – Allows the pilot to select and remove

approaches, departures, and arrivals from the flight plan.

When using a flight plan, available procedures for the

departure and/or arrival airport are offered automatically.

Otherwise, the pilot may select the desired airport, then

the desired procedure.

GPS 500 Quick Reference

KEYS AND KNOBS