- ページ 8

アビオニクス・ディスプレイ Garmin GPSMAP 400 seriesのPDF パイロット・マニュアル補遺をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 400 series 27 ページ。 Non-waas; display interfaces
Garmin GPSMAP 400 series にも： 取扱説明書 (6 ページ), クイック・リファレンス・マニュアル (2 ページ), リファレンス・マニュアル (2 ページ), 取付説明書 (28 ページ), 取付説明書 (30 ページ), テンプレートマニュアル (2 ページ), テンプレート (1 ページ), 設定マニュアル (2 ページ), パイロット・マニュアル (28 ページ), クイック・リファレンス・マニュアル (2 ページ)

ページを印刷する
Garmin GPSMAP 400 series パイロット・マニュアル補遺
Section 2
Goodrich STORMSCOPE Interface
Cell mode uses a clustering program to identify
clusters of electrical activity that indicate cells. Cell
mode is most useful during periods of heavy storm
activity. Displaying cell data during these periods frees
the user from sifting through a screen full of discharge
points and helps to better determine where the storm
cells are located.
6

Displaying Storm Data on the Map Page

The Map Page displays cell or strike information using yellow lightning strike symbology overlaid on
a moving map. This added capability improves situational awareness, which in turn makes it much easier
for the pilot to relate storm activity to airports, navaids, obstacles and other ground references.
Storm Activity
Storm Data Displayed on the Map Page
Storm data is displayed on the Map Page only if aircraft heading is available.
In normal operation, the current mode and rate are displayed in the top right corner of the Map Page.
The mode is described by the word "STRIKE" when in strike mode, or "CELL" when in cell mode.
The strike data display phases are:
1. Lightning Symbol (latest strikes; less than one minute; a black guard band is placed around the strike symbol
during the fi rst six seconds of display)
2. Large Plus "+" sign (more than one minute old)
3. Small Plus "+" sign (more than two minutes old)
4. Strike Data is no longer displayed (after three minutes)
Cell Mode
Strike Rate