- ページ 31

アビオニクス・ディスプレイ Garmin GTN 625のPDF アクティベーション手順をオンラインで閲覧またはダウンロードできます。Garmin GTN 625 46 ページ。 Gps/sbas navigation system as installed in cessna 172r
Garmin GTN 625 にも：ユーザーマニュアル (20 ページ), マニュアルの補足 (31 ページ), 正誤表 (4 ページ), ユーザーマニュアル (22 ページ), フライトマニュアル (49 ページ), パイロット・マニュアル (28 ページ)

6 GMX 200 - GDL 69 Series Activation

The GMX 200 must be correctly configured to accept information from the GDL 69 Series, in accordance

with the GMX 200 Multi-Function Display Installation Manual, P/N 190-00607-04 (or later).

1. Make sure that the aircraft's XM antenna has an unobstructed view of the southern sky.

It is highly recommended that the aircraft be outside of and away from the hangar.

2. Hook up the aircraft to external power if available.

The complete activation process may take 45-60 minutes or more, depending on the demand on the

XM activation system.

3. Power on the avionics and allow the GMX 200 and the GDL 69 Series to power up.

Do not power cycle the units during the activation process.

4. Verify that the yellow "GDL 69" failure flag is not displayed.

The absence of a failure flag confirms that the GMX 200 is communicating with the GDL 69 Series.

5. Go to the XM Activation Page

a) Press the FN key until the FIS function is displayed. Press the FIS smart key.

b) Press the fourth smart key until STATUS is displayed.

c) Press the MENU/ENT key.

d) Press the line select key next to Products. Diagnostics and Start Diag will be displayed. (in

software version 5.5, Start Diag will not be displayed.)

e) Press the line select key next to Diagnostics.

f) Activation will be displayed.

6. To activate service, call XM at 1.800.985.9200.

When activating the data service, specify Aviator LT, Aviator, or Aviator Pro. XM service should

activate in 45 to 60 minutes. During the activation process the unit may display several different

activation levels. This is normal and should be ignored. When the service class (Aviator LT,

Aviator, or Aviator Pro) and all of the weather products for the class that you subscribed to are

displayed, press the Accept smart key. Wait 10 to 30 seconds to allow the GDL 69 Series to process

the accept command and lock in the activation. To see the available weather products for your

subscription level see Table 6-1.

Make sure to be specific for requesting a DATA ONLY service under the Data Radio ID

and an AUDIO ONLY service under the Audio Radio ID. Most XM receivers in the

market have both audio and data services under one ID. The GDL 69 Series will not

function correctly with both an audio and a data service activated under one ID.

During the activation process do not change channels or pages during this time.

190-00355-04

Rev. J

NOTE

GDL 69/69A XM Satellite Radio Activation Procedures

Page 25