- ページ 9
アビオニクス・ディスプレイ Garmin GTN 635のPDF アクティベーション手順をオンラインで閲覧またはダウンロードできます。Garmin GTN 635 46 ページ。 Gps/sbas navigation system as installed in cessna 172r
Garmin GTN 635 にも： ユーザーマニュアル (20 ページ), マニュアルの補足 (31 ページ), 正誤表 (4 ページ), ユーザーマニュアル (22 ページ), フライトマニュアル (49 ページ), パイロット・マニュアル (28 ページ)
ページを印刷する
Data Radio ID
Smart Keys
Figure 2-1. Data Radio ID and Audio Radio ID Locations
7. For GDL 69A/69AH units, the audio portion is activated independently from the weather. The
activations will not be simultaneous. Once the data channel is activated, bring up the XM Radio
page on the MX20. This can be accomplished by pressing the FN key until XM is displayed. Press
the XM smart key. A non-activated unit will display only channel 0 (Radio ID) and channel 1 (XM
Preview). An activated unit will display the full list of XM channels. Tune to channel 1, while
waiting for audio activation. Wait for the XM display to become populated with the XM channel list
(see Figure 2.2 above for an example of what this looks like).
8. Select an XM channel in order to lock in the radio activation.
Channels 0 and 1are free preview channels and should not be used for this procedure. Press the Chan
smart key and then press either the Up or Down Arrow key to select a new channel. Wait for the
channel to be displayed in the Active Channel box at the top of the XM display. The XM radio
activation is complete when the channel is displayed.
190-00355-04
Rev. J
Figure 2-2. MX20 with Full Channel List
GDL 69/69A XM Satellite Radio Activation Procedures
Audio Radio ID
Line Select Keys
Page 3