- ページ 19

船舶用GPSシステム Garmin ECHOMAP 70 SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin ECHOMAP 70 Series 44 ページ。 Flat-mount kit
Garmin ECHOMAP 70 Series にも：オーナーズマニュアル (50 ページ), クイック・スタート・マニュアル (4 ページ), オーナーズマニュアル (38 ページ), オーナーズマニュアル (30 ページ), 取付説明書 (6 ページ), オーナーズマニュアル (50 ページ), インストレーション・インストラクション (4 ページ), インストレーション・インストラクション (4 ページ), 取付説明書 (34 ページ)

ページを印刷する

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select Nav Info > Tracks > Active Track Options > Record

Interval > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time

> Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Synchronizing User Data Across the Garmin

Marine Network

Before you synchronize the user data across the network, you

should backup your user data to prevent possible data loss. See

Backing Up Data to a

Computer.

You can share waypoints, tracks, and routes with all compatible

devices connected to the Garmin Marine Network (Ethernet)

automatically.

NOTE: This feature is not available on all models.

Select Nav Info > Manage Data > User Data Sharing > On.

If a change is made to a waypoint, track, or route on one

chartplotter, that data is synchronized automatically across all

chartplotters on the Ethernet network.

Deleting All Saved Waypoints, Routes, and

Tracks

Select Nav Info > Manage Data > Clear User Data > All >

OK.

Combinations

The Combination screen shows a combination of different

screens at the same time. The number of options available on

the Combination screen depends on the optional devices you

have connected to your chartplotter and whether you are using

premium maps.

Selecting a Combination

Select Combinations.

Select a combination.

Customizing a Combination Screen

Not all options are available on all chartplotter models.

Select Combinations.

Select a combination.

Select Menu.

Select an option:

Combinations

NOTICE

• To change the name, select Name, and enter a new

name.

• To customize the numbers shown on the screen, select

Overlay Numbers.

• To change the data shown in the combination, select Edit

Combination, select the screen, and select the new data.

• To rearrange the data, select Edit Combination, hold the

screen, and select the new location for the data.

• To resize the windows, select Edit Combination, and

drag the arrows.

Creating a Custom Combination Screen

You can create a custom Combination screen to suit your

needs.

Select Combinations > Customize > Add.

If necessary, select a layout and adjust the size of each

screen.

Select the data to display in the combination.

If necessary, select Done.

Enter a name for the combination.

When properly connected to an optional Garmin sounder

module and a transducer, your compatible chartplotter can be

used as a fishfinder. There are different sonar views to help you

view the fish in the area.

The adjustments you can make to each sonar view vary

depending on the view you are in and the chartplotter model,

sounder module, and transducer you have connected.

Sonar Views

The sonar views available vary depending on the type of

transducer and optional sounder module connected to the

chartplotter. For example, you can view the Split Frequency

view only if you have a dual-frequency transducer connected.

There are four basic styles of sonar views available: a full-

screen view, a split-screen view that combines two or more

views, a split-zoom view, and a split-frequency view that

displays two different frequencies. You can customize the

settings for each view in the screen. For example, if you are

viewing the split-frequency view, you can adjust the gain for

each of the frequencies separately.

If you do not see an arrangement of sonar views to suit your

needs, you can create a custom screen

Combination

Screen).

Full-Screen Sonar View

There are several full-screen views available, depending on the

equipment connected. The full-screen sonar views show a large

image of the sonar readings from a transducer. The range scale

along the right side of the screen shows the depth of detected

objects as the screen scrolls from the right to the left.

Depth information

Suspended targets or fish

Bottom of the body of water

Sonar

(Creating a Custom