- ページ 3

船舶用GPSシステム Garmin ECHOMAP UHD2 7 SeriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin ECHOMAP UHD2 7 Series 15 ページ。

Fixed-Bail Mounting the Device

If you are mounting the bracket on fiberglass with screws, it is recommended to use a countersink bit to drill a

clearance counterbore through only the top gel-coat layer. This will help to avoid cracking in the gel-coat layer

when the screws are tightened.

1 If you do not want to use the included wood screws to secure the bail-mount bracket, select the mounting

hardware appropriate for the bail-mount bracket and your mounting surface.

Only pan-head machine bolts or self-tapping screws should be used to secure the swivel base. If you use

screws with countersunk heads, you may damage the mounting bracket.

2 Using the bail-mount bracket as a template

3 Complete an action:

• If you are using the included wood screws

• If you are using your own mounting hardware, drill the four pilot holes using a drill bit appropriate for your

hardware.

4 Secure the bail-mount bracket to the mounting surface using the included wood screws or your mounting

hardware.

5 Loosely install the bail-mount knobs

6 Place the cradle

in the bail-mount bracket.

7 Tighten the bail-mount knobs.

NOTICE

, mark the pilot holes through the screw holes.

, drill the four pilot holes using a 3 mm (

on the sides of the cradle.

in.) drill bit.