- ページ 30

船舶用GPSシステム Garmin Fishfinder 160 BlueのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Fishfinder 160 Blue 50 ページ。 Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 160 Blue にも：仕様 (2 ページ)

ページを印刷する

www.reelschematic.com

Unit Operation

Setup Menu: Numbers Tab

Speed Display Selections

Depth Number Selections

Speed

The Fishfinder 160 Blue can display the boat' s 'Speed' Over Water

when equipped with a speed sensor. When set to 'Auto,' the unit will

automatically sense when a capable sensor is connected and display the

boat' s speed.

To set the Speed display ﬁ eld:

1. Highlight the 'Numbrs' tab on the Setup Menu.

2. Highlight the 'Speed' selection ﬁ eld and press ENTER.

3. Choose 'Auto,' 'Show' or 'Hide,' then press ENTER to accept the

selection.

Depth Number

The 'Depth Number' setting refers to how the unit finds the digital

depth number that is displayed in the upper left corner of the screen.

When set to 'Auto,' the unit will show the most accurate digital depth

possible. However, this may cause the chart to update slower as the unit

calculates the 'Auto' depth. When set to 'From Chart' (default), the unit

finds the digital depth from the same image you see on the chart. The 'From

Chart' setting allows the chart to update faster than when the unit is set to

'Auto' and is recommended when using the unit in deep water.

NOTE: In 'From Chart' mode, the Fishﬁ nder 160 Blue may

not be able to get the digital Depth Number if the bottom

is not visible on the chart. Adjust the Depth Range on the

Adjustment Bar until the bottom is visible, or change the

setting to 'Auto' to get the digital Depth Number.