- ページ 28

船舶用GPSシステム Garmin Fishfinder 240 BlueのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Fishfinder 240 Blue 50 ページ。 Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue にも：オーナーズマニュアル (50 ページ), オーナーズマニュアル (50 ページ), パイロット・マニュアル (12 ページ), 仕様 (2 ページ), 仕様 (2 ページ), オーナーズマニュアル (50 ページ)

www.reelschematic.com

Unit Operation

Setup Menu: Tools/Numbers Tabs

Noise Reject Manual Adjustment Slider

Normal Numbers

Noise Reject (continued)

Numbers Tab

like to see normal or large numbers on the chart. You can also configure

the unit to display 'Battery Voltage,' (water) 'Temperature,' and 'Speed' Over

Water if the unit is equipped with capable sensors. You can also set up how

the unit finds the digital 'Depth Number.' To access the 'Numbrs' tab, place

the highlight over it using the arrow keys.

'Depth,' 'Temperature,' 'Battery Voltage' and 'Speed' fields on the chart.

Large Numbers

To change the Noise Reject Setting:

1. Highlight the 'Tools' tab on the Setup Menu.

2. Highlight the 'Noise Reject' selection ﬁ eld and press ENTER.

3. Choose 'Off,' 'Auto,' or 'Manual' and press ENTER.

To manually adjust the Noise Reject Setting:

1. Select 'Manual' in the 'Noise Reject' ﬁ eld of the 'Tools' tab, then press

ENTER. A slider will appear below the 'Noise Reject' selection ﬁ eld.

2. Use the Up or Down ARROW key to highlight the slider, then press

ENTER.

3. Use the Left or Right ARROW key to manually adjust the Noise Reject

to the desired setting, then press ENTER.

The 'Numbrs' (Numbers) tab allows you to choose whether you would

This setting determines the size of the numbers displayed in the

To select Normal or Large Numbers:

1. Highlight the 'Numbrs' tab on the Setup Menu.

2. Highlight the 'Number Size' selection ﬁ eld and press ENTER.

3. Choose 'Normal' or 'Large' and press ENTER to accept the selection.