- ページ 7

船舶用GPSシステム Garmin GNS 530AWのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Garmin GNS 530AW 25 ページ。 For continued airworthiness bell 206b
Garmin GNS 530AW にも： パイロット・マニュアル補遺 (24 ページ), パイロット・マニュアル補遺 (50 ページ), パイロット・マニュアル補遺 (24 ページ), 補足マニュアル (12 ページ), クイック・リファレンス (23 ページ), 取扱説明書 (23 ページ)

ページを印刷する
Garmin GNS 530AW クイック・リファレンス
GPS 500W

Bottom Row Keys

The nearest (NRST) key (GPS 500W)
N
displays the Nearest Airports page. Then,
turning the small right knob steps through
the NRST pages.
The course deviation indicator (CDI) key
C
(GNS 530W) is used to toggle the navigation
source (GPS or VLOC) that provides output
to an external HSI or CDI.
The omni-bearing selector (OBS) key is
O
used for two functions: to activate OBS selec-
tion and as a suspend key.
As a Suspend key, it is used to select manual
or automatic sequencing of waypoints.
Pressing this key selects SUSP mode, which
retains the current "active to" waypoint as
your navigation reference even after passing
the waypoint (i.e., prevents sequencing to the
next waypoint). Pressing the OBS key again
returns to normal operation, with automatic
sequencing of waypoints.
Whenever OBS mode is selected, you may set
the desired course to/from a waypoint using
the OBS Page, or an external OBS selector on
your HSI or CDI.
KEYS
GNS 530W
The message (MSG) key is used to view
M
system messages, important warnings, and
requirements.
The flight plan (FPL) key allows you to
F
create, edit, activate and invert flight plans,
as well as access approaches, departures and
arrivals. A closest-point-to-flight-plan feature
is also available from the flight plan key.
The vertical navigation (VNAV) key allows
VNAV
you to create a three-dimensional profile
which guides you to a final (target) altitude at
a specified location.
The procedures (PROC) key allows you to
P
select approaches, departures and arrivals
from your flight plan. When using a flight
plan, available procedures for your departure
and/or arrival airport are offered automati-
cally. Otherwise, you may select the desired
airport, then the desired procedure.
190-00357-01 Rev H
5