- ページ 14

船舶用GPSシステム Garmin GPS 17 SeriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPS 17 Series 17 ページ。 Technical specifications
Garmin GPS 17 Series にも：取付説明書 (16 ページ), 取付説明書 (19 ページ), 技術仕様 (37 ページ)

ページを印刷する

NSTALLATION

NSTRUCTIONS

Final Wiring Connection

After all the wiring is complete, the cables are attached on the backside of the GPSMAP 3005C MFD. If the MFD is not being networked,

ﬁrmly afﬁx the weather cap over the open connector to limit corrosion of the contacts. The connection ports are labeled on the back of the

MFD.

To install the Power/Data and Network cables:

1. Align the notch and locking ring tab on the black Power/Data cable with the black POWER/NMEA port on the back of the unit. Carefully

press the cable in until it is ﬁrmly seated. Do not force the cable, as this may damage the pins!

2. When the cable is seated, turn the locking ring clockwise until it stops.

3. If networking the MFD with the Garmin Marine Network, insert the RJ-45 connector into the NETWORK port on the back of the unit and

screw the locking ring in clockwise until it is ﬁrmly seated.

With power applied to the circuit, test the installation by pressing the POWER key on the front of the unit. See the GPSMAP 3005C Owner's

Manual for instructions on initializing the receiver.

Connection Ports

GPSMAP 3005C & GPS 17