- ページ 10
船舶用GPSシステム Garmin GPS 400WのPDF パイロット・マニュアル補遺をオンラインで閲覧またはダウンロードできます。Garmin GPS 400W 50 ページ。 Garmin gps receiver quick reference guide
Garmin GPS 400W にも： パイロット・マニュアル補遺 (24 ページ), クイック・リファレンス (23 ページ), パイロット・マニュアル補遺 (24 ページ), 補足マニュアル (12 ページ), クイック・リファレンス・マニュアル (25 ページ)
ページを印刷する
Part One: Section 2
TIS Controls and Display
Traffic Ground Track
Traffic ground track is indicated in the
400W/500W display by a "target track vector", a short
line displayed in 45-degree increments, extending in
the direction of target movement.
Traffic Target Track Vector.
Traffic Warning Window
When the unit is on any page (other than the
NAV Traffic Page or when a TAWS/Terrain, or Dead
Reckoning pop-up is displayed) and a traffic threat is
imminent, the Traffic Warning Window is displayed.
The Traffic Warning Window shows a small thumb-
nail map which can take the user to the Traffic Page
by pressing ENT, or go back to the previous page by
pressing CLR.
Traffic Warning Window
NOTE: The Traffic Warning Window is disabled when
the aircraft ground speed is less than 30 knots or when
an approach is active.
6
Traffic Page
TIS Traffic data is displayed on two 400W/500W
Series unit pages, the Traffic Page and the Map Page.
The 500W Series unit can also be configured to
display a traffic thumbnail window below the VLOC
frequency window. Unlike other forms of traffic, TIS
traffic does not require heading data to be valid on the
map. The only difference between TIS and other traffic
data occurs on the Traffic Page. If heading is available,
then the traffic data is compensated and displayed as
heading-up. If it' s not available, the Traffic Page is a
track-up display. It is labeled on the upper portion of
the Traffic Page.
Traffic Page Display Range
Various display ranges can be selected for optimal
display of TIS traffic information.
To change the display range on the Traffic
Page:
Press RNG to zoom through the range selec-
tions which are: 12/6 NM, 6/2 NM, and
2 NM.