- ページ 4
船舶用GPSシステム Garmin GPS 500WのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Garmin GPS 500W 23 ページ。 For continued airworthiness bell 206b
Garmin GPS 500W にも： パイロット・マニュアル補遺 (24 ページ), パイロット・マニュアル補遺 (50 ページ), パイロット・マニュアル補遺 (50 ページ), パイロット・マニュアル補遺 (24 ページ), 補足マニュアル (12 ページ), クイック・リファレンス (25 ページ), 取扱説明書 (23 ページ)
ページを印刷する
Left-hand Keys and Knobs
The COM power/volume knob controls unit power and, in the
k
GNS 530W, communications radio volume. Press momentarily to
disable automatic squelch control. Turn clockwise to turn the unit
on.
In the GNS 530W, the VLOC volume knob controls audio volume
j
for the selected VOR/ Localizer frequency. Press momentarily to
enable/disable the ident tone.
In the GNS 530W, the large left knob (COM/VLOC) is used to
y
tune the megahertz (MHz) value of the standby frequency for the
communications transceiver (COM) or the VOR/Localizer receiver,
whichever is currently selected by the tuning cursor.
In the GNS 530W, the small left knob (PUSH C/V) is used to tune
v
the kilohertz (kHz) value of the standby frequency for the com-
munications transceiver (COM) or the VLOC receiver, whichever
is currently selected by the tuning cursor. Press this knob momen-
tarily to toggle the tuning cursor between the COM and VLOC
frequency fields.
In the GNS 530W, the COM flip-flop key is used to swap the
W
active and standby COM frequencies. Press and hold to select the
emergency channel (121.500 MHz).
In the GNS 530W, the VLOC flip-flop key is used to swap the
V
active and standby VLOC frequencies
(i.e., make the selected standby frequency active).
2
KEYS AND KNOBS
GPS 500W
On the GNS 530W, the large and small left knobs
allow you to tune the desired COM or VLOC
frequency.
GNS 530W