- ページ 8

アンプ A-Designs MP-2A SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。A-Designs MP-2A Series 14 ページ。 Handcrafyed tube microphone preamplifier
A-Designs MP-2A Series にも：オーナーズマニュアル (9 ページ)

ページを印刷する

FUNCTIONS

* Channel 1&2 VU Meters - Meters provide general indication of level. They are set to -4dB.

* Level control knobs are just that. They will control the level/pad of the incoming signals.

* Polarity - 0 to 180

* Tone Switch ½ and 3/4 - This switch will allow you to set your outputs to your configuration.

* Phantom-On/Off - The Phantom Switch is there to give you the option of using various kinds of

Microphones. If you are using a Condenser Microphone please make sure you have the Phantom

Switch in the on position. If you turn the Phantom Power Switch off while the Mic is still plugged in

there will be a 5 second delay before it is completely off.

*Heat Vents - Allow the flow and circulation of air to cool the tubes and transformers.

*Power Switch - Large size for easy operation up and down (on/off).

*Power Light Indicator - Red Jewel light indicator. When power is on... the light will illuminate.

*Color Code - Red Jewel Light indicates 110 volt, Blue Jewel Light indicates 220 volt. (A Designs

method to distinguish between domestic and export 220v).

A Designs Audio

Owners Manual MP -A Series

Edition 3.0

January, 2005