- ページ 22

船舶用GPSシステム Garmin GPSMAP 400 seriesのPDF パイロット・マニュアル補遺をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 400 series 27 ページ。 Non-waas; display interfaces
Garmin GPSMAP 400 series にも：取扱説明書 (6 ページ), クイック・リファレンス・マニュアル (2 ページ), リファレンス・マニュアル (2 ページ), 取付説明書 (28 ページ), 取付説明書 (30 ページ), テンプレートマニュアル (2 ページ), テンプレート (1 ページ), 設定マニュアル (2 ページ), パイロット・マニュアル (28 ページ), クイック・リファレンス・マニュアル (2 ページ)

Section 4

Ryan TCAD Interface

When the target pointer is placed on trafﬁ c, the

trafﬁ c range, squawk code (if available), and tail

number (if available) are displayed.

Monitoring Trafﬁ c

Refer to the information in the TCAD Pilot' s Guide regarding monitoring trafﬁ c on the display and the

corresponding actions to take.

Highlighting Trafﬁ c Data Using Map Panning

Panning is another map page function, which allows you to move the map beyond its current limits

without adjusting the map scale. When you select the panning function—by pressing the small right

knob—a target pointer flashes on the map display. A window also appears at the top of the map display

showing the latitude/longitude position of the pointer, plus the bearing and distance to the pointer from

your present position.

To use the map panning feature:

1. Press the small right knob to activate the panning target pointer.

2. Turn the small right knob to move up (turn clockwise), or down (turn counterclockwise).

3. Turn the large right knob to move right (turn clockwise), or left (turn counterclockwise)

4. To cancel map panning and return to your present position, press the small right knob.

When the target pointer is placed on trafﬁ c, the trafﬁ c range, altitude separation, squawk code (if

available), and tail number (if available) are displayed. The trafﬁ c is identiﬁ ed as follows:

TA: Traffic Advisory. This is traffic within 500 ft. of altitude separation that is

converging or maintaining altitude separation.

PA: Proximity Advisory. This is traffic within 500 ft. of separation and it is not a TA.

TRFC: other traffic.