- ページ 2

船舶用GPSシステム Garmin GPSMAP 421sのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garmin GPSMAP 421s 28 ページ。 Marine navigation equipment
Garmin GPSMAP 421s にも: 取付説明書 (12 ページ), リファレンス・マニュアル (2 ページ), テクニカル・リファレンス (42 ページ), 重要な安全情報 (48 ページ), テンプレートマニュアル (2 ページ), 適合宣言 (1 ページ)

Garmin GPSMAP 421s 取付説明書
3. Install the unit in the opening (see Figure 2):
Place the unit housing in the recently cut hole in the mounting surface.
Slide the tension mount arms onto the hex bolts and secure them with the (4) wing nuts.
Tighten the (4) wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.
Assembled unit and
flush mount hardware
NOTE: If you are installing a Fishfinder 400C, the wiring harness must be connected to the boat's power supply and transducer per the installation
instructions included with the unit.
NOTE: If you are installing a GPSMAP 400 series unit, you must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna
(if applicable), and transducer (if applicable) per the installation instructions included with the unit.
Tension mount brackets
Figure 2
Wing nuts